Fluence Bioengineering now offers a reliable, user-friendly dimmer that controls light intensity from 0-100% for up to 50 Fluence fixtures. Controlling PPFD while reducing energy consumption, and maintaining a high coefficient of utilization (CU) by increasing light-use efficiency, is now easier than ever.
If you are purchasing this dimmer to control VYPR or RAZR fixtures you should select the “Pigtails” option.
If you are purchasing this dimmer to control SPYDR or RAY fixtures , please consult the chart below to select the proper connector.
VYPR & RAZR
Purchased After 12-01-15 Pigtails
Purchased Before 11-01-17 3.5mm AUX
Purchased After 11-01-17 Pigtails
Purchased Before 12-01-17 3.5mm AUX
Purchased After 12-01-17 Pigtails
This dimmer allows growers to easily control the light intensity of their Fluence fixture via an easy-to-use up/down arrow function, and clearly shows the user their light output via a digital display. Click accessories tab for recommended hardware.
While this device is built upon years of customer input, we are relying on your feedback to make continual improvements over the coming months. The first generation dimmer comes with a special introductory price as we continue to refine this product and ensure it meets the same high standards we’ve set for our lighting solutions.
The dimmer connects to each Fluence fixture via a 3.5mm jack or pigtail leads (provided) through an adjustable PWM or 0-10V signal switch, and can be daisy-chained to connect up to 50 fixtures (not to exceed 200 feet of signal wire) off a single dimmer. Additional signal cable(s) to connect multiple fixtures not included.
Extending the signal wire more than 200 feet will weaken the signal strength and may reduce the total number of fixtures that can be dimmed. If more than 200 feet of total signal wire is needed, please consult an electrician or contact a Fluence representative at firstname.lastname@example.org.
A battery-backup ensures light levels are maintained in the event of a brief power outage to the dimmer.
This dimmer should be installed away from wet environments and areas likely to be splashed with water, and always dry hands thoroughly before using. Do not install this dimmer in environments with 80%+ humidity.
Please note: This dimmer is meant to control the overall light intensity of your Fluence Bioengineering fixture(s). It is not meant to act as a timer to control photoperiod. Please use a switch or timer to power fixtures on/off for photoperiod control.
Dimmers are made to order, please expect a 2 week lead time.