The ALL NEW Powerbox™ FLIPBOX™ allows any ballast to run 2 lights (non-simultaneously). The Powerbox™ FLIPBOX™ works with magnetic and new digital ballasts and allows you to expand, without the need for bringing in additional power circuits. Simply plug the Powerbox™ FLIPBOX™ into your ballast and you can plug 2 lamps into the FLIPBOX ™. A trigger cord controls the 'Flip.' Each FLIPBOX™ has a 120V slave outlet, so you can daisy-chain multiple FLIPBOX ™ trigger cords to each other and use as many FLIPBOXES ™ as you have ballasts, all triggered by one timer. Compatible with 120V and 240V ballasts. Includes 6' patch cord (Flipbox to Ballast) and 6' 120V trigger cord. The Powerbox™ FLIPBOX™ is the BEST FLIPBOX™ on the market and has many advantages over other flip boxes. First, it REALLY WORKS and has a 5-year warranty. Second, we make our FLIPBOXES™ in individual modules so you get extended distance for placing your lights; all of your cords are not tied to a single panel. Third, in the event of a component failure, you can quickly swap-out one module and you are back at full capacity. With large, multi-ballast panels, if there is a component failure, you have to take the entire panel system down while you arrange a replacement.

WARNING: CERTAIN ELECTRONIC AND DIGITAL BALLASTS THAT CONTAIN ‘ERROR SENSING’ TECHNOLOGY MAY NOTPERFORM WELL WITH FLIPBOXES®. ERROR SENSING TECHNOLOGY IS MEANT TO SHUT THE BALLAST OFF IN THE CASEOF A BULB MALFUNCTION. WHEN THE FLIPBOX® SWITCHES BETWEEN LAMPS, THESE BALLASTS SOMETIMES MISTAKETHE FLIP FOR A BULB ERROR AND THE BALLAST SHUTS DOWN. BALLASTS WITH ERROR SENSING TECHNOLOGY,INCLUDING LUMATEK AND NEXTGEN, MAY PERFORM SPORADICALLY. WHEN USING BALLASTS BY THESEMANUFACTURERS, IT IS RECOMMENDED THAT YOU TURN THE BALLAST OFF 5 MINUTES BEFORE THE FLIP AND TURNTHE BALLAST BACK ON 5 MINUTES AFTER THE FLIP.POWERBOX™ RECOMMENDS QUANTUM DIGITAL BALLASTS FOR PERFECT SWITCHING UNDER ALL CIRCUMSTANCES.